Showing posts with label hardware. Show all posts
Showing posts with label hardware. Show all posts
Five Free Tools for Multi-Monitor Computer Set-Ups
We’d like to share several freeware and open source tools available for download to help you harness the power of multi-display set ups and get you up and running quickly. We hope that you might find the perfect application for you!
Synergy is an open source software application that lets users of multi-monitor workstations share a mouse and keyboard between several displays. All you have to do is move the mouse cursor off the edge of one display to have it on another adjacent display. It also creates a single virtual clipboard to allow the copy and pasting across the many displays. With Synergy comes a handy module for synchronizing your screensavers across multiple displays so that they run in tandem. If there is a password required after screensaver mode, you only have to type in the password into one monitor to activate all the others. There is also a fork of Synergy called Synergy+ that you can check out on Google Code.
Input Director grants you the ability to use a single keyboard and mouse on a multi-computer set up, making it the ideal solution for networked computers, a common situation where professionals have more than one computer (such as a desktop and laptop). All you have to do is move the pointer off the edge of the display and it appears on the adjacent monitor on that side, making it the active monitor.
UltraMon is a great tool for multi-display computer configurations that can support up to 10 monitors. It allows you to set custom features for each monitor such as resolution, wallpaper, and taskbar settings. UltraMon allows for the moving of running programs from the primary display to the secondary (and vice versa). Each of the monitors will have their own taskbar showing you the applications running on them. You can predefine and save monitor settings, as well as position where a program opens from the shortcut menu to help speed up your workflow. It also has a feature for easily turning off secondary monitors to conserve electricity consumption when you don’t need them and to reduce distraction when they’re not in use.
This app saves you from the hassle of having to drag your mouse off the desk as you try to get to the farthest monitor in a multi monitor environment. It immediately warps your cursor across the borders of the display on demand and runs in the background to avoid taxing the systems resources. It is accessible from the system tray where you can change the settings at will. It also speeds up mouse targeting by an estimated 30%.
MultiMon Taskbar lets you have unique taskbars for each monitor, helping you to easily organize your applications across multiple computer screens. It has a move-to-monitorbutton accessible from all Windows programs for convenience and ease of movement from one monitor to another. In addition, MultiMon has a clipboard extender module for synchronizing your clipboards across multiple displays, making copy and pasting between networked computers a breeze.
Cleaning computer system fans
A Cool Computer Tip
For all computers – All versions of Windows
For all computers – All versions of Windows
Computer crashes are not always the fault of misfiring software.
This can be caused by dirt, dust, and animal hair that collect inside the computer causing overheating.
Airborne debris accumulates inside the computer, and prevents the cooling fan(s) from properly cooling it.
Automatic safety overrides built-in to most new computers, will shut down or slow down the computer whenever the processor starts getting too hot.
Desktops most often have at least one, usually more, cooling fans.
It is important to keep the cooling fan motors and blades clean and free from debris to ensure that they keep the computer cool.
Airborne debris accumulates inside the computer, and prevents the cooling fan(s) from properly cooling it.
Automatic safety overrides built-in to most new computers, will shut down or slow down the computer whenever the processor starts getting too hot.
Desktops most often have at least one, usually more, cooling fans.
It is important to keep the cooling fan motors and blades clean and free from debris to ensure that they keep the computer cool.
Here’s what you’ll need:
- Q-Tips (Cotton Buds)
- Rubbing Alcohol (Isopropyl alcohol)
- A Can of Compressed Air (Available at most computer stores)
Compressed air is not actually compressed ‘Air’. It is a mixture of butane/propane/methane.
It is highly inflammable. DO NOT USE live circuits, running fans on near naked flames.
The Procedure:
- Firstly, Disconnect the computer from the household Power!!
- Remove the cover of the computer.Caution: when opening the case; touch a bare metal piece of the chassis to discharge any static electricity in case of any accidental touching of the electronic components that can cause a static discharge, and damage them.Take the compressed air can and spray directly into all the cooling fans inside the computer to dislodge pieces of dirt, dust, and animal hair that have built-up on the cooling fan blades and motor.WARNING: A word of caution for using compressed air directly on fans – Do not aim the air flow directly at thinner fan blades; there is a risk of spinning them faster than designed and ruining them.
Alternatively breaking the blades off and rendering the fan useless.If it is absolutely necessary to direct the air onto the blades; just put a finger in the middle of the fan to act as a brake or govenor to limit speeds.However, it is not advisable to aim directly at the blades; at an angle is preferred.The optimum angle of the nozzle is about 45° – 60° and 3 – 4 inches away from the actual components, especially the condensers/capacitors etc., so as not to damage them. - Take a cotton swab (Q-tip) dip it lightly in the alcohol – making sure to clean both sides of each fan blade.Do not soak the Q-tip in alcohol – just a little bit is fine – but it does evaporate quickly (that is a good thing) so do not be afraid to get the fan blades coated with it – it won’t be there long.
Clean Cooling Fan Blades and clean Computer Cases ensures the computer runs cooler and quieter.
When the computer runs cooler, there is less chance of the computer’s automatic heat overload features kicking in – and the computer will run smoother and much more quietly.
Whilst the cover of the computer is off, be sure to gently vacuum the motherboard and the rest of the inside of the case.
Do not use Q-tips or alcohol on the mainboard (motherboard)!
Lightly vacuum out the case, ensuring not to touch the vacuum nozzle onto the motherboard; hold it several inches above it to remove any dirt, dust or animal hairs that may be sticking to the surface.
Clean the computer following these steps above, every two to three months. A cleaner computer really does run better; it will be much quieter too
PC won’t boot – Fault finding procedure
PLEASE NOTE THAT IT IS EXPECTED THAT YOU POWER OFF AT ANY TIME YOU NEED TO INSTALL, REMOVE OR REPLACE ANY ITEM ON THE MOTHERBOARD. THE AUTHOR IS NOT TO BE HELD RESPONSIBLE FOR THOUGHTLESS REMOVAL OF HARDWARE WHILST THE COMPONENTS ARE UNDER POWER, WHETHER IN STANDBY OR NOT.
ALWAYS POWER OFF BEFORE TRYING TO MANIPULATE THE MOTHERBOARD OR FITTED DEVICES.
ALWAYS POWER OFF BEFORE TRYING TO MANIPULATE THE MOTHERBOARD OR FITTED DEVICES.
The author has been an electronics technician with many years experience in various fields. He tends to tackle electronic problems with a slightly different approach to most people.
He normally removes the motherboard from the case because, sometimes, apart from anything else, extra mountings have been added that can intermittently short out parts of the motherboard stopping it from working. It is also a good point to start by checking that the mountings have all been placed correctly and there are no extra unused mountings screwed into the back panel. Also visually inspect the board for any stray screws or other parts that might be loose or lodged behind it.
At the moment of opening the case, the very first check to be made is that there are no bulging or domed electrolytic capacitors to be seen anywhere. Any that are seen require immediate replacement! Once replaced continue with the instructions below.
(Check the cost for repair since it may be cheaper to buy a new board. Take into account the fact that you may require to replace the CPU and Memory should current boards not be compatible with your old Hardware.)
(Check the cost for repair since it may be cheaper to buy a new board. Take into account the fact that you may require to replace the CPU and Memory should current boards not be compatible with your old Hardware.)
It is a good idea to place a sheet of wood on the work surface before dismantling the computer, both as an insulator and to protect the work surface. The wood should be thick enough to allow sufficient height (under the motherboard) for any cards that might be inserted later, so that the metal plate can drop over the edge of the wood. Without it, the card may well be pushed up and out of the socket causing serious damage to motherboard & the card.
The Power Supply Unit (PSU) is removed from the case for use, or alternatively use a known good spare. PSUs can usually be removed by undoing just 4 screws.
The following photograph shows work on an old P4 computer
It should be noted in the above photograph, that there is a grounding lead (RED WIRE) that is left connected at all times. When handling motherboards it is a good idea to earth yourself to discharge electrostatic build up that can cause damage to the delicate electronic components. Whilst the possibility of damage is reduced there is always the possibility of inflicting extra problems, so placing one hand on the power supply casing to discharge electrostatic build up is a wise precaution. Likewise keeping the power cord connected to the electrical supply ensures that, whilst Phase & Neutral have been disconnected, EARTH remains connected at all times, minimising possible electrostatic damage.
Initially, the motherboard, is set up in a minimum configuration with only the CPU, CPU FAN & minimum memory requirements. Sometimes motherboards require two memory cards in order to function. A graphics card may be needed if there is no built in monitor connector on the motherboard.
Ensure that there is means of access to the power on pins that are on the mother board. These require a momentary shorting to switch the computer on. They will also require several seconds of shorting to switch it off. To switch off, it’s better to use the power switch, if available, or pull out the plug.
The use of a multi-block power socket that acts as a switch is helpful to remove the power to all sockets being used. In the event that power needs to be disconnected quickly it gives a faster access and acts as an emergencypower off button.
If the motherboard doesn’t have an on-board buzzer, make sure that a speaker is attached in order to hear anyPower On Self Test (POST) warnings.
With this configuration it is easy to see if the motherboard will power up with the absolute minimum of components. It removes the possibility of having something in the case stopping the power-on process. It gives the ability to power up the motherboard and gain access to the BIOS (basic input/output system) settings. If there is no response to shorting the Power On pins then it is likely that the motherboard is faulty.
In BIOS it may be found that there are several configuration options for Power On in the event of an unexpected power failure.
The configuration frequently allows the choice of On, Off or Last.
This means that in the event of a power failure your PC will either Power On again, Remain Off or Return to the last condition before power was removed. It is frequently helpful whilst “benchtesting” (once you can gain access to the BIOS) to set it as last condition to save shorting out the power on pins. For boards that don’t have that option, a 1000μF capacitor with minimum 6.3V working voltage can be wired across an old reset switch & leads, then placed across the power on pins. When powered on it will act as a temporary short as it charges allowing “automatic” power on.
The configuration frequently allows the choice of On, Off or Last.
This means that in the event of a power failure your PC will either Power On again, Remain Off or Return to the last condition before power was removed. It is frequently helpful whilst “benchtesting” (once you can gain access to the BIOS) to set it as last condition to save shorting out the power on pins. For boards that don’t have that option, a 1000μF capacitor with minimum 6.3V working voltage can be wired across an old reset switch & leads, then placed across the power on pins. When powered on it will act as a temporary short as it charges allowing “automatic” power on.
When you power up and beeping is heard with no visible monitor activity, power down and remove the memory. If the sound of the beep changes, it’s possible that the graphics card and/or the Monitor isn’t being “seen” by the CPU. The memory is checked before the Graphics card and Monitor so removal of the memory will help identify the location of the problem. If the beeping doesn’t change then it’s more likely that the problem is a memory access problem. That could mean Northbridge failure or memory failure.
The same applies when powering up, getting no reaction from the monitor and/or speaker. Power down and remove the memory.
Power up again and listen for any audible warnings (POST)
Power up again and listen for any audible warnings (POST)
When the motherboard speaker is giving an audible warning, the motherboard is actually trying to start up (BOOT) but something is hindering output to the Display.
If, with no “on-board” memory installed, an audible warning is not heard, then the problem may be with the CPU or motherboard.
There is a possibility that there are problems with the memory. However, normally this would not stop the display from working. If possible try the memory in another computer to see if there is a similar response or even to run a memory test to prove it’s good. (There are instances where motherboards use on-board memory for on-board graphics cards. In this case, if the motherboard supports an additional PCI or AGP Graphics card, add one.)
Remove the Graphics Card and try another. If the graphics card is in an AGP slot, try using a simple PCI card in any PCI slot. Sometimes though, when the motherboard defaults to or has been set up to AGP first, the PCI will only work in a couple of slots, so try them all. Switching off each time before swapping the cards location.
Removal of the CMOS battery for a short while should restore the CMOS settings to factory defaults. Normally the factory default is for PCI. It doesn’t normally matter what PCI slot is used.
There are occasions when a faulty Motherboard refuses to allow the AGP to function but PCI graphics were OK. If a PCI card works then try another good known working AGP card or try the AGP in another PC if one is available.
One of the first things to do now, is check the motherboard to ensure that all jumpers are installed correctly and that nothing has been moved or is perhaps bridging the wrong pins.
One of the jumper blocks is for the BIOS. There are several possible configurations depending upon board manufacturer.
One position will force the CPU to use the NORMAL BIOS settings.
Another could force the CPU into BIOS configuration settings for maintenance, without requiring a combination of keyboard strokes at start up.
A frequently found setting is one that resets the BIOS to factory defaults, whilst another possibility, No jumper present, could force the Motherboard into BIOS RECOVERY mode that searches a Floppy drive for the BIOS firmware.
If the jumper is missing,or not making proper contact, the motherboard goes into AUTOMATIC mode and looks for BIOS firmware on Floppy in order to replace the installed firmware. In this state there is frequently NO DISPLAY on older boards!
One position will force the CPU to use the NORMAL BIOS settings.
Another could force the CPU into BIOS configuration settings for maintenance, without requiring a combination of keyboard strokes at start up.
A frequently found setting is one that resets the BIOS to factory defaults, whilst another possibility, No jumper present, could force the Motherboard into BIOS RECOVERY mode that searches a Floppy drive for the BIOS firmware.
If the jumper is missing,or not making proper contact, the motherboard goes into AUTOMATIC mode and looks for BIOS firmware on Floppy in order to replace the installed firmware. In this state there is frequently NO DISPLAY on older boards!
Care should be taken not to take things for granted, since it has been known for these jumpers to develop a bad contact, even if, rarely, showing as fitted correctly but not actually physically making contact!
Be aware that sometimes the jumper links may be in position but can be faulty or not making proper contact. If you find one that is troublesome, replace it as soon as possible.
Sometimes, when fitting the jumpers in place, it is easy to miss the pin (running the plastic down the side of the pin instead of over the top) and it’s only seen afterwards by careful scrutiny of the pins.
Be aware that sometimes the jumper links may be in position but can be faulty or not making proper contact. If you find one that is troublesome, replace it as soon as possible.
Sometimes, when fitting the jumpers in place, it is easy to miss the pin (running the plastic down the side of the pin instead of over the top) and it’s only seen afterwards by careful scrutiny of the pins.
After checking the jumpers have been installed correctly the next step is to test the CPU.
If possible, try a known working CPU. If another computer with the same type of processor is available, try the CPU in that machine. Also try the CPU from the other machine in the motherboard that has problems.
Make sure that you use a suitable heat sink compound like ‘Arctic Silver 5’. Without a heat sink compound between the CPU and the heat sink, there is a severe risk of burning out the CPU within a few seconds, especially with older AMD CPUs.
Make sure that you use a suitable heat sink compound like ‘Arctic Silver 5’. Without a heat sink compound between the CPU and the heat sink, there is a severe risk of burning out the CPU within a few seconds, especially with older AMD CPUs.
Once the CPU, memory and graphics card are proven to be functional, check the motherboard to see if it has emergency BIOS repair support.That is, see if there is a way to replace or upgrade your BIOS by use of a floppy disk. Check the website of the board’s manufacturer. Carefully read the instructions and follow them to the letter. Download the latest, or any, applicable BIOS for your motherboard and install it in accordance with the manufacturer’s instructions to a floppy disk. Add a floppy drive and set the motherboard to access the floppy drive to read and replace the BIOS. Never wait until you have your Board working and Windows OS installed to do the update. There have been too many instances of “bricked” motherboards caused during a BIOS update from within Windows.
Connect a floppy disk drive to the Motherboard & fit the power cable.
Using a floppy disk, as explained by the manufacturer, Power on and listen to see if there are any audible warnings from the floppy to be accessed. There is usually a click and whirring that occurs when the floppy starts to work.
Note: If you see the floppy disk light come on immediately you power on, power off and check the floppy disk cable. This event is usually caused by cable reversal. Make sure that both ends are connected /orientated correctly. The light should only come on when the floppy is actually being “accessed”. If the light was on and the floppy was inside at the time you may have to re-write the contents. The cable reversal frequently corrupts the contents.
Note: If you see the floppy disk light come on immediately you power on, power off and check the floppy disk cable. This event is usually caused by cable reversal. Make sure that both ends are connected /orientated correctly. The light should only come on when the floppy is actually being “accessed”. If the light was on and the floppy was inside at the time you may have to re-write the contents. The cable reversal frequently corrupts the contents.
Don’t power off unless you think that you have either waited too long and nothing appears to happen or after a long pause you haven’t heard the floppy drive to be accessed at all. The process usually takes only a few minutes.
If a new BIOS has been installed, start again from the beginning to see if the video output reaches the display. Start from minimal system to see what works and what doesn’t.
One other point that should be noted and checked from the start, is that the Video cable connector(s) should be checked to ensure that none of the pins has been bent when connecting to the socket(s). Don’t forget that there are two ends to a cable and not all cables disappear inside the monitors, especially on LCD type monitors. Check both ends.
If, after following all of the above procedures, the motherboard still refuses to boot, it would indicate that the motherboard is faulty and needs replacing.
Once this procedure has got you to the point that you can see a display on your screen, you can add a keyboard, access BIOS & change the configuration.
It’s now time to start adding components to see if everything works.
Additional components can be added one at a time to confirm all is well. Always switch off before adding or removing anything, including the keyboard.
Once the unit is working satisfactorily, the unit can be slowly re-assembled into the case. Do it slowly, not adding everything in one go.
If It fails again inside the case then look to see what is causing you problems. Only use the screw fittings & mountings where the holes on the motherboard are surrounded by a metal ‘ground’ that is about or slightly larger than the screw head. Any other fixing point may possibly be a cause of a short circuit and system failure again.
If It fails again inside the case then look to see what is causing you problems. Only use the screw fittings & mountings where the holes on the motherboard are surrounded by a metal ‘ground’ that is about or slightly larger than the screw head. Any other fixing point may possibly be a cause of a short circuit and system failure again.
The author recommends SpeedSys. It is not possible to go directly to the SpeedSys site so go to this one . You will then see this:
Select the SpeedSys link indicated.
Converting to Water Cooled CPU
This article describes the change over from air cooling to water cooling an Intel QX6800 Extreme quad core CPU. (Not overclocked)
Inside the case there are several components, each contributing to heating up the internal environment.
The CPU is fitted onto an Evga nForce 680 SLI 122-ck-NF60 mother board. An Evga GeForce 8800GT 640Mb Video card and 4Gb OCZ DDR2 800mhz ram together with 2 x 500Gb hard drives, a Soundblaster Audigy 2ZS and a Jeantech Storm 700w Sli/cross-fire PSU complete the round up of the main sections of the home brew computer. The ‘bits & pieces’ are fitted inside a Jeantec Gaming Development Aqua Case.
The original CPU cooling was implemented by a Zalman CPNS9500A. After a few months, the author decided to convert the air cooling on the CPU to a water cooling method.
The author was faced with the choice of purchasing the individual components such as a water block, pump, radiator, fans, flow meter, alarm unit, tubing and anti-freeze/anti-corrosion fluids or a complete kit of parts. After looking at the costs involved, a Zalman XT Reserator price was not very much more than a set of top quality components. Considering that the Reserator also features three alarms; coolant flow, over temperature and fluid level, it represents peace of mind and good value.
A Zalman Reserator XT kit was purchased as this included all the components and accessories needed to complete the job from start to finish. The kit included a Zalman ZM-WB5 CPU Water-block.
The first impression on opening a very well packed box was the size of the Reserator. It was much larger than imagined. However, its size gives massive thermal capacity and houses two radiators. The body of the unit comprises of a custom made aluminium extrusion which in itself has the coolant flowing through, thus contibuting massively to heat exchange to the outside world.
The kit was comprehensively equipped:
[IMG]
[/IMG]
Fig 0: Contents of the Zalman kit.
The kit includes mounting components for Socket 775, Socket 478 and AMD Socket AM2/754/939/940. Also included is 0.25 litre bottle of Zalman ZM-G300 Anti-corrosion fluid and a comprehensive user manual
One of the advantages of using a Zalman cooling system is that the Zalman fan and the water-block share the same mounting hardware. This enabled the replacement of the fan with the water-block a simple task. Otherwise the motherboard would need to have been removed to fit the reinforcing mount underneath.
Thermal compound:
Not all thermal compounds are equal. The thermal grease that is supplied with the kit was not used. Instead Arctic Silver 5 thermal compound was used to ensure the best possible transfer of heat from the CPU heat spreader to the Zalman water-block.
Coolant Additive and Water:
Zalman anti-corrosion fluid must be diluted with distilled water. In the UK distilled water is relatively hard to find in ‘local’ shops. The author visited many shops asking for distilled water. In all instances the shop assistant gave what they thought was distilled water but turned out to be de-ionised water.
Battery top-up water used to be distilled but is now de-ionised – do not use.
In the UK supermarkets, distilled water for steam irons is distilled but contains other chemicals and perfumes. The author does not know if this liquid is OK to use as a dilutant.
Eventually, real distilled water was located on Internet for delivery in 5 litre bottles at a reasonable cost.
The Conversion process:

Fig 1: The original Zalman CPNS9500A heat sink and fan.
Only two screws hold the heat sink & fan assembly onto the mounting hardware. After the removal of the heat sink, all of the old thermal compound must be carefully removed.
There is a special fluid for removing Arctic Silver 5. However, the author used a single drip of ethyl alcohol on a cotton bud to soften the old material.
The CPU must be clinically cleaned, ensuring that no foreign matter such as dust, hair or even skin flakes are present. Using a cotton bud will, more than likely, leave very fine hairs behind. After much cleaning, a can of compressed air was used to blast away any invisible debris before applying the Arctic Silver 5 compound and mounting the water-block.

Fig 2: Zalman ZM-WB5 CPU water-block.
The Jeantech case has the advantage of the sides are hinged at the bottom and can be opened out flat to give very easy access to the motherboard.
Installing of the water-block must be done with care. It is important to install the water-block in the correct orientation. Note that one of the pipes is dead centre and the other is offset.
The one in the centre is the cold coolant inlet and the other is the warm coolant outlet. The Outlet pipe must be physically higher than the inlet when the case is closed. This is to ensure that when the system is started, that are no air pockets in the water-block to cause hot spots but more importantly to allow for natural thermal flow in the event of pump failure.

Fig 3: The mounting arms.
Once the mounting arms have been fitted to the water block, they are held down by two screws. The arms are, in effect, cantilever springs and exert quite a down force onto the CPU heat spreader. This aids the settlement and bedding in the thermal compound. Arctic Silver claims that the efficiency of heat transfer improves over a few days of usage.

Fig 4: Showing the adjacent heat generating components.
By removing the heat from the CPU to outside the case, the resulting drop in internal temperature will have an additional benefit in helping the other heat generators to run at a cooler temperature too.

Fig 5: Internal layout.
Zalman supply a nice I/O Bracket (A). This allows the pump cable (B) and the coolant pipes to enter/exit through rounded apertures (C). The rounding of the coolant pipe apertures ensures that there is no chaffing on the pipes. A nice touch.

Fig 6: Tubing clamps.
Some enthusiasts recommend using jubilee type clips that clamp the tubing by tightening a screw. The author found that the tubing was a very tight fit. The clips supplied with the kit were very strong and certainly put enough pressure on the tube ensuring a watertight seal.

Fig 7: One tube fitted.
The I/O bracket was mounted in the case. At the same time as mounting the bracket, the DC cable was also installed. The cable was plugged into a fan connector on the motherboard.
Four metres of PVC tubing was supplied with the kit. This was more than enough to install the system.

Fig 8: General view of layout.
The tubing was not cut at first. The two ends were fed through the I/O bracket and fitted carefully to the water block.

Fig 8a: Degassing.
Before the tubing from the water blocks is connected to the Reserator, it must be filled with coolant and air purged from the pumps and radiators. The kit was supplied with a short ‘degassing’ tube for that purpose. The connectors on the Reserator are quick release non-drip types which means that the tubes can be removed and replaced without having to drain the system.
The supplied coolant was diluted at 1:4 ratio, making 1.25 litres.
Initially only 1 litre was poured into the Reserator. The Reserator was then powered up and after following the instructions, the pump was primed and all air was purged with no more bubbles appearing in the tube. The remaining .25 litre of coolant was then poured into the unit.
When this was achieved, the degassing tube was disconnected and the quick release connectors were removed.

Fig 9: The intlet, outlet pipes and the power connections.
Once the location of the main unit was decided, the main tubing was cut to length, with a few inches extra to facilitate moving about.
The quick release tube connectors to & from the CPU water block were fitted and plugged into the main unit.
Watching the water block for leakage, just in case, the unit was powered up to purge the tubing and water block.
It should be noted that Zalman supply a short ‘jumper cable’ which when following the clear installation instructions, allows the complete water cooling system to be powered up without powering up the motherboard.

Fig 10: Tubing and CPU water block filled.
The author ran the system for a couple of hours with the case open. There was no sign of any leaks or bubbles in the tubes.

Fig 11: The Reserator XT in action.
The bottom temperature reading is the ambient of air entering in the radiators. The top temperature equals the coolant temperature. These readings can be displayed in Celsius or Fahrenheit.
The ‘volume’ knob controls the fan speed when it is in manual mode. In automatic mode, it has no effect.
The bottom three buttons, left to right: C or F readout, Automatic/Manual selector and LEDs on/off.
Being powered by the motherboard the unit is switched on & off with the computer.

Fig 12: The completed setup. Much quieter.
TIP: Note that the computer is standing on a piece of carpet cut to size. Placed upside down, it assists on making the computer easily moved without scratching the surface of the desk.
The Reserator XT is more than capable of tending to the cooling needs of most computer configurations. It is possible for it to supply coolant to other heat generators. If this is done, it is important to supply the coolant to the appropriately fitted water blocks in the following sequence:
CPU water block first, then Northbridge water block followed by the VGA water block and RAM water block and return warm coolant to the Reserator.
Inside the case there are several components, each contributing to heating up the internal environment.
The CPU is fitted onto an Evga nForce 680 SLI 122-ck-NF60 mother board. An Evga GeForce 8800GT 640Mb Video card and 4Gb OCZ DDR2 800mhz ram together with 2 x 500Gb hard drives, a Soundblaster Audigy 2ZS and a Jeantech Storm 700w Sli/cross-fire PSU complete the round up of the main sections of the home brew computer. The ‘bits & pieces’ are fitted inside a Jeantec Gaming Development Aqua Case.
The original CPU cooling was implemented by a Zalman CPNS9500A. After a few months, the author decided to convert the air cooling on the CPU to a water cooling method.
The author was faced with the choice of purchasing the individual components such as a water block, pump, radiator, fans, flow meter, alarm unit, tubing and anti-freeze/anti-corrosion fluids or a complete kit of parts. After looking at the costs involved, a Zalman XT Reserator price was not very much more than a set of top quality components. Considering that the Reserator also features three alarms; coolant flow, over temperature and fluid level, it represents peace of mind and good value.
A Zalman Reserator XT kit was purchased as this included all the components and accessories needed to complete the job from start to finish. The kit included a Zalman ZM-WB5 CPU Water-block.
The first impression on opening a very well packed box was the size of the Reserator. It was much larger than imagined. However, its size gives massive thermal capacity and houses two radiators. The body of the unit comprises of a custom made aluminium extrusion which in itself has the coolant flowing through, thus contibuting massively to heat exchange to the outside world.
The kit was comprehensively equipped:
[IMG]
Fig 0: Contents of the Zalman kit.
The kit includes mounting components for Socket 775, Socket 478 and AMD Socket AM2/754/939/940. Also included is 0.25 litre bottle of Zalman ZM-G300 Anti-corrosion fluid and a comprehensive user manual
One of the advantages of using a Zalman cooling system is that the Zalman fan and the water-block share the same mounting hardware. This enabled the replacement of the fan with the water-block a simple task. Otherwise the motherboard would need to have been removed to fit the reinforcing mount underneath.
Thermal compound:
Not all thermal compounds are equal. The thermal grease that is supplied with the kit was not used. Instead Arctic Silver 5 thermal compound was used to ensure the best possible transfer of heat from the CPU heat spreader to the Zalman water-block.
Coolant Additive and Water:
Zalman anti-corrosion fluid must be diluted with distilled water. In the UK distilled water is relatively hard to find in ‘local’ shops. The author visited many shops asking for distilled water. In all instances the shop assistant gave what they thought was distilled water but turned out to be de-ionised water.
Battery top-up water used to be distilled but is now de-ionised – do not use.
In the UK supermarkets, distilled water for steam irons is distilled but contains other chemicals and perfumes. The author does not know if this liquid is OK to use as a dilutant.
Eventually, real distilled water was located on Internet for delivery in 5 litre bottles at a reasonable cost.
The Conversion process:
Fig 1: The original Zalman CPNS9500A heat sink and fan.
Only two screws hold the heat sink & fan assembly onto the mounting hardware. After the removal of the heat sink, all of the old thermal compound must be carefully removed.
There is a special fluid for removing Arctic Silver 5. However, the author used a single drip of ethyl alcohol on a cotton bud to soften the old material.
The CPU must be clinically cleaned, ensuring that no foreign matter such as dust, hair or even skin flakes are present. Using a cotton bud will, more than likely, leave very fine hairs behind. After much cleaning, a can of compressed air was used to blast away any invisible debris before applying the Arctic Silver 5 compound and mounting the water-block.
Fig 2: Zalman ZM-WB5 CPU water-block.
The Jeantech case has the advantage of the sides are hinged at the bottom and can be opened out flat to give very easy access to the motherboard.
Installing of the water-block must be done with care. It is important to install the water-block in the correct orientation. Note that one of the pipes is dead centre and the other is offset.
The one in the centre is the cold coolant inlet and the other is the warm coolant outlet. The Outlet pipe must be physically higher than the inlet when the case is closed. This is to ensure that when the system is started, that are no air pockets in the water-block to cause hot spots but more importantly to allow for natural thermal flow in the event of pump failure.
Fig 3: The mounting arms.
Once the mounting arms have been fitted to the water block, they are held down by two screws. The arms are, in effect, cantilever springs and exert quite a down force onto the CPU heat spreader. This aids the settlement and bedding in the thermal compound. Arctic Silver claims that the efficiency of heat transfer improves over a few days of usage.
Fig 4: Showing the adjacent heat generating components.
By removing the heat from the CPU to outside the case, the resulting drop in internal temperature will have an additional benefit in helping the other heat generators to run at a cooler temperature too.
Fig 5: Internal layout.
Zalman supply a nice I/O Bracket (A). This allows the pump cable (B) and the coolant pipes to enter/exit through rounded apertures (C). The rounding of the coolant pipe apertures ensures that there is no chaffing on the pipes. A nice touch.
Fig 6: Tubing clamps.
Some enthusiasts recommend using jubilee type clips that clamp the tubing by tightening a screw. The author found that the tubing was a very tight fit. The clips supplied with the kit were very strong and certainly put enough pressure on the tube ensuring a watertight seal.
Fig 7: One tube fitted.
The I/O bracket was mounted in the case. At the same time as mounting the bracket, the DC cable was also installed. The cable was plugged into a fan connector on the motherboard.
Four metres of PVC tubing was supplied with the kit. This was more than enough to install the system.
Fig 8: General view of layout.
The tubing was not cut at first. The two ends were fed through the I/O bracket and fitted carefully to the water block.
Fig 8a: Degassing.
Before the tubing from the water blocks is connected to the Reserator, it must be filled with coolant and air purged from the pumps and radiators. The kit was supplied with a short ‘degassing’ tube for that purpose. The connectors on the Reserator are quick release non-drip types which means that the tubes can be removed and replaced without having to drain the system.
The supplied coolant was diluted at 1:4 ratio, making 1.25 litres.
Initially only 1 litre was poured into the Reserator. The Reserator was then powered up and after following the instructions, the pump was primed and all air was purged with no more bubbles appearing in the tube. The remaining .25 litre of coolant was then poured into the unit.
When this was achieved, the degassing tube was disconnected and the quick release connectors were removed.
Fig 9: The intlet, outlet pipes and the power connections.
Once the location of the main unit was decided, the main tubing was cut to length, with a few inches extra to facilitate moving about.
The quick release tube connectors to & from the CPU water block were fitted and plugged into the main unit.
Watching the water block for leakage, just in case, the unit was powered up to purge the tubing and water block.
It should be noted that Zalman supply a short ‘jumper cable’ which when following the clear installation instructions, allows the complete water cooling system to be powered up without powering up the motherboard.
Fig 10: Tubing and CPU water block filled.
The author ran the system for a couple of hours with the case open. There was no sign of any leaks or bubbles in the tubes.
Fig 11: The Reserator XT in action.
The bottom temperature reading is the ambient of air entering in the radiators. The top temperature equals the coolant temperature. These readings can be displayed in Celsius or Fahrenheit.
The ‘volume’ knob controls the fan speed when it is in manual mode. In automatic mode, it has no effect.
The bottom three buttons, left to right: C or F readout, Automatic/Manual selector and LEDs on/off.
Being powered by the motherboard the unit is switched on & off with the computer.
Fig 12: The completed setup. Much quieter.
TIP: Note that the computer is standing on a piece of carpet cut to size. Placed upside down, it assists on making the computer easily moved without scratching the surface of the desk.
The Reserator XT is more than capable of tending to the cooling needs of most computer configurations. It is possible for it to supply coolant to other heat generators. If this is done, it is important to supply the coolant to the appropriately fitted water blocks in the following sequence:
CPU water block first, then Northbridge water block followed by the VGA water block and RAM water block and return warm coolant to the Reserator.
Subscribe to:
Posts (Atom)



